Epson C11CF39201 User Manual Download Page 109

Page: 109 / 166

Paper Handling

Single sheets do not feed properly

Paper does not feed.

Cause

What to do

Continuous paper is in the paper path.

Press the

Load/Eject

button to feed the continuous paper back to

the standby position. Set the paper release lever to the
single-sheet feeding position and insert a new sheet. See
“Switching to single sheets” on page 53 for more information.

The paper source is set to tractor feeding.

Set the paper release lever to the single-sheet feeding position.
See “Setting the Paper Release Lever” on page 19.

The paper on the sheet guide is positioned too far
to the left or right far the printer to detect that it is
there.

Move the paper (and the edge guides) a little to the left or right.

The paper is not loaded properly.

See “Loading Single Sheets” on page 44 for instructions on loading
single-sheet paper.

The paper-thickness lever is set incorrectly.

Set the paper-thickness lever to match the thickness of your paper.
See “Adjusting the Paper Thickness Lever” on page 19.

Paper is creased, old, too thin, or too thick.

See “Paper” on page 148 for information on paper specifications
and use new, clean sheets of paper.

Paper does not eject completely.

Cause

What to do

The paper may be too long.

Press the

LF/FF

button to eject the page. Use paper that is within

the specified range. See the paper specifications in “Paper” on
page 148.

The paper does not feed properly with the optional cut-sheet feeder.

Cause

What to do

The cut-sheet feeder is not installed properly.

Reinstall it as described in “Installing the cut-sheet feeder” on
page 125.

Too many sheets are loaded in the cut-sheet
feeder. You cannot load more than 150 sheets of
paper in the high-capacity cut-sheet feeder.

Load less than 150 sheets of paper. See “Cut-Sheet Feeder” on
page 124 for more information.

The edge guides of the cut-sheet feeder are not
positioned correctly.

Align the left edge guide with the arrow mark, then move the right
edge guide to match your paper’s width.

There is only one sheet left in the bin.

Add more paper to the cut-sheet feeder.

LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide

Troubleshooting

109

Summary of Contents for C11CF39201







































































































































































Search results

Summary of Contents for C11CF39201

Reviews:

Related manuals for C11CF39201

Brands by name

Popular brands

Epson C11CF39201, User Manual

Search results

Summary of Contents for C11CF39201

Reviews:

Related manuals for C11CF39201

Brands by name

Popular brands