background image

15

Intellectual Property Rights

Trademarks

microSDHC Logo is a trademark of SD-3C, LLC.

Wi-Fi® and Wi-Fi Direct™ are the trademarks or registered trademarks of the Wi-Fi Alliance.
Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all 
rights in those marks.

OPEN SOURCE SOFT-
WARE LICENSE

As well as software owned by Epson, this product also uses open source software.
The following provides information on the open source software used in this product.
1.  This product includes open source software programs according to the license terms of each program. 

The open source software programs are without warranty; however, any malfunctions (including malfunctions caused by the open source software 
programs) that occur in this product do not influence the warranty conditions provided for this product.

2.  We provide the source code of some open source software programs. If you desire to receive the source code above, please see the "http://www.epson.

com" and contact the customer support of your region. We provide the source code until five (5) years after the discontinuation of this product. You shall 
comply with the license terms of each open source software program.

3.  The open source software programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PAR-

TICULAR PURPOSE. See the license agreements of each open source software program for more details, which are described in the product.

4.  The license terms of each open source software program are described in Home screen > Settings > About device > Legal information > Open source 

licenses of the product.

General Notes

Notes Regarding Wire-
less LAN

Do not use the Wireless LAN function in France unless you are indoors.
If you purchase this product outside of North America and Taiwan, please note that this product emits wireless LAN electromagnetic waves on channels 
1 to 13. Therefore, do not use the wireless LAN function in North America and Taiwan where wireless LAN channels are limited to 1 to 11 by the Wireless 
Telegraphy Act.
Follow local laws and regulations when using in other regions.

Wireless Telegraphy Act 
Regulations

The following acts are prohibited by the Wireless Telegraphy Act.

•  Modifying and disassembling (including the antenna)
•  Removing the label of conformance
•  Using the 5 GHz bandwidth LAN when outdoors

Restriction of Use

This product is manufactured based on the specifications of the country of sale. When using this product outside the country of sale, contact your nearest 
support center.
When this product is used for applications requiring high reliability/safety of function and precision, such as transportation devices related to aviation, rail, 
marine, automotive; disaster prevention devices; various safety devices, you should use this product only after giving consideration to including fail- safes 
and redundancies into your design to maintain safety and total system reliability.
Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communica-
tion equipment, nuclear power control equipment, or medical equipment related to direct medical care, please make your own judgment on this product's 
suitability after a full evaluation.

Notes on Frequency

This product operates in the same frequency bandwidth as industrial devices such as microwave ovens, scientific, and medical devices and mobile object 
identification (RF-ID) systems (licensed premises radio stations, amateur, and unlicensed specified low-power radio stations (hereafter "other radio sta-
tions")) used in factory production lines.
1.  Before using this device, make sure there are no "other radio stations" being used in the vicinity.
2.  If this device causes RF interference between the device and "other radio stations", promptly move to a different location, stop using the device, and 

contact your local dealer to ask for advice on preventing interference (for example setting up partitions).

3.  In addition, when harmful radio wave interference occurs between the device and "other radio stations", contact your local dealer.

Authentication informa-
tion

Summary of Contents for BT-2000




















Reviews: