background image

14

Specifications

Model Number

BT-2000

Material

Polysilicon TFT active matrix

LCD panel size

0.42" wide panel (16:9)

LCD panel pixel count

Horizontal 960 x vertical 540 dots

Angle of view

Approximately 23 degrees (diagonally)

Virtual screen size

64" support (virtual viewing distance 4 m)

Color reproduction

24 bit color (approximately 16,770,000 colors)

Platform

Android 

TM

 4.0.4

Supported movie formats

MP4 (MPEG4+AAC), MPEG2 (H.264+AAC)

Supported still image formats

JPEG, PNG, BMP, GIF

Supported audio formats

WAV, MP3, AAC

Supported 3D

Side-by-side format

Internal memory

Main memory

1 GB

User memory

8 GB

External memory

microSD (2 GB maximum)
microSDHC (32 GB maximum)

Connector ports

micro-USB, 4 pin mini jack (earphones with microphone complying with the CTIA standard)*1, 
microSD card slot

Operating temperature

0 to 40°C, humidity 20 to 80% (no condensation)

Charging temperature

5 to 35°C, humidity 20 to 80% (no condensation)

Storage temperature

-10 to 60°C, humidity 10 to 90% (no condensation)

Power voltage

Controller

11VDC 1.64A (when AC adapter connected)

AC adapter

Model Number

AST1116Z1-1

Manufacturer

PHIHONG TECHNOLOGY CO., LTD.

Electrical rating

100 to 240 VAC 50 to 60 Hz 0.4 A

Power consumption

When operating at full capacity 4000 mW, when in sleep mode 80 mW, when off 5 mW

Battery

Type

Lithium-ion batteries 1240 mAh (x2)

Lithium content

Less than 1.5 g

Amount of watt hour rating

Less than 20 Wh

Frequency band

IEEE 802.11 b/g/n/a

Frequency range

2.4 GHz band 1 to 13 ch, 5 GHz band 36 to 140 ch

Modulation

OFDM, DS-SS

Potential interference range

10 m

Battery life

Approx. 4 hours (When operating at full capacity)

Reliability

Life span

10,000 h (When brightness is set to the default, and used continuously in an environment of 25°C. 
The life span means the point at which the product enters the wear out failure period. Product 
performance may then degrade, such as a decline in screen luminance of 50% from the initial 
stages.)

Mean-Time Between Failure (MTBF) 180,000 hours (Failure means a random failure during the random failure period.)

 Exterior dimensions
(W x D x H)

Headset

205 x 136 x 100 mm (without the head band)

Controller

70 x 157 x 35.3 mm (without protruding section)

Mass

Headset

290g (without cables)

Controller

265 g (without batteries, 1 battery is approx. 50 g)

Camera

Resolutions

5 million pixels

Image resolutions  Still images

2596 x 1948 dots

Movies

1920 x 1080 dots

Depth sensing  640 x 480 dots (depth sensing distance 30 to 100 cm)

Earphones with mic

Earphone impedance

16Ω±15%

Earphone output

Max. voltage 150 mV or less
Voltage with broadband characteristics 75 mV or more

Mic

Capacitor microphone

Sensors

GPS/geomagnetic sensor/IMU (accelerometer/gyroscopic sensor)/illumination sensor

Bluetooth 3.0

HSP/A2DP/HID/OPP/SPP/AVRCP

Bluetooth 4.0 LE *2

PXP/FMP

*1 :Restrictions in operation may occur when using an adapter plug.
*2 :You can only connect to a beacon with devices specified by Epson.

Summary of Contents for BT-2000




















Reviews: