manualshive.com logo in svg

Epson BrightLink 455Wi, User Manual

Share
Download
Epson BrightLink 455Wi User Manual Download Page 138

138

Solving Problems

Error light(s) status

Error light(s) status

Description

P

Green or orange

Flashing orange

Off

It’s time to replace the lamp. See page 127 for instructions. If you continue to 
use the lamp after the replacement warning, there is an increased possibility 
that the lamp may break.

P

Flashing red

Off

Flashing orange

Rapid cooling is in progress. Although this is not an abnormal condition, 
projection will stop automatically if the temperature rises higher. Make sure 
there is plenty of space around and under the projector for ventilation, and that 
the air filter and vents are clean.

P

Red

Off

Red

The projector is overheating, which turns the lamp off automatically. Wait until 
the projector switches to standby mode (about 5 minutes). Make sure there is 
plenty of space around and under the projector for ventilation. 

The air filter may be clogged. Clean or replace the air filter as described on 
pages 125 to 127.

If you’re using the projector above an altitude of 4,900 feet (1,500 meters), turn 
on 

High Altitude Mode

 in the Operation menu (see page 92).

If the projector continues to overheat after you clean the air filter, stop using 
the projector, disconnect the power cord, and contact Epson for help as 
described on page 155.

Warning:

 Except as specifically explained in this 

User’s Guide

, do not attempt 

to service this product yourself.

P

Flashing red

Red

Flashing red

The projector has an internal problem. Stop using the projector, disconnect the 
power cord, and contact Epson for help, as described on page 155.

P

Red

Off

Flashing red

There is a problem with the fan or temperature sensor. Stop using the 
projector, disconnect the power cord, and contact Epson as described on 
page 155.

P

Red

Flashing red

Off

The lamp may be burnt out. First make sure the lamp cover is securely 
installed. If that’s not the problem, the air filter may be clogged. Clean or 
replace the air filter as described on pages 125 to 127.

If this does not resolve the problem, let the lamp cool and then remove it. If the 
lamp is cracked, replace it as described on page 127. If the lamp is not cracked, 
reinstall it. If reinstalling doesn’t work, replace the lamp.

If you’re using the projector above an altitude of 4,921 feet (1,500 meters), turn 
on 

High Altitude Mode

 in the Operation menu (see page 92).

If none of these suggestions resolves the problem, contact Epson as described 
on page 155.

P

Flashing red

Flashing red

Flashing red

The projector has an Auto Iris error or power error. Stop using the projector, 
disconnect the power cord, and contact Epson for help, as described on 
page 155.

Summary of Contents for BrightLink 455Wi













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands