Epson BrightLink 450Wi - Interactive Projector, User Manual

Page: 88 / 186

88
Using the Projector on a Network
■
If your network does not assign addresses automatically, turn
off
DHCP
and enter the projector’s
IP Address
,
Subnet
Mask
, and
Gateway Address
, as needed.
To enter numbers, use the arrow buttons on the remote
control to select each number on the screen, then press the
Enter
button. When you’re finished entering an address in
the network menu, highlight
Finish
, then press the
Enter
button.
10. Press
Esc
to return to the previous menu.
11. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
setting to
Off
.
12. When you’re done making these changes, press
Esc
, select
Complete
and press
Enter.
Then select
Yes
and press
Enter
again to save your settings.
Press
Menu
to exit the menu system.