8.
Insert the new cartridge into the holder and push it down until it clicks into place.
9.
Once you replace all the cartridges that need replacing, close the cartridge cover and the printer
cover.
10. Press the
ink button to begin charging the ink. This takes about 2 minutes.
When the
power light stops flashing and remains on, ink charging is finished.
Caution:
Never turn off the product while the power light is flashing or you will waste ink.
Note:
If the
ink light is on after the print head moves to its home position, the ink cartridge may not
be installed properly. Press the
ink button again, and press down the ink cartridge until it clicks into
place.
If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
91
Summary of Contents for Artisan 1430
