Epson Apex, User Manual

Page: 41 / 158

To set the real time clock, follow these steps:
1. If you are using the Apex Plus, insert the GW-BASIC
diskette into drive A. At the command prompt, type the
following and press
Enter:
SETRTC /I
The screen displays a prompt similar to this:
Set Real Time Clock Ver.
1.00
Current Time is
12:05:31
Enter New Time:
2. Using a 24 hour format, type the new time and press
Enter.
Use colons to separate the hours, minutes, and
seconds. It’s not necessary to type the seconds.
The screen then displays a prompt similar to this:
Current Date is
Wed 05-25-88
Enter New Date (mm-dd-yy) :
3. Type the new date and press
Enter.
Use dashes to separate
the month, day, and year.
4. The screen displays the current time and date you set and
returns you to the command prompt.
1-26 Setting Up Your
System