Epson Apex User Manual Download Page 39

Page: 39 / 158

7. Press

to return to the MS-DOS command prompt.

8. Store the original system diskettes in a safe place.

9. Properly label the working copies you just created.

Copying diskettes on the Apex Plus 20

1. The

prompt should be displayed on the screen. If it is

not, type

: and press

Enter.

2. Type:

DISKCOPY

and press

Enter.

The screen displays the following prompts:

Insert SOURCE diskette in drive A:

Press any key when ready...

3. Insert the MS-DOS system diskette (the source) into drive

A and turn the diskette drive latch to lock the diskette in
place. Then press any key.

The DISKCOPY program copies the contents of the
diskette to the computer’s memory and then displays these
prompts:

Insert TARGET diskette in drive A:

Press any key when ready...

4. Release the disk latch and remove the MS-DOS system

diskette from drive A.

5. Insert the blank diskette (the target) in the drive and turn

the diskette drive latch to lock the diskette in place. Then

press any key.

1-24 Setting Up Your System

Summary of Contents for Apex































































































































































Search results

Summary of Contents for Apex

Reviews:

Related manuals for Apex

Brands by name

Popular brands

Epson Apex, User Manual

Search results

Summary of Contents for Apex

Reviews:

Related manuals for Apex

Brands by name

Popular brands