manualshive.com logo in svg

Epson Apex, User Manual, Page: 102 / 158

Share
Download
Epson Apex User Manual Download Page 102

Chapter 5

Trobleshooting

You should 

not encounter any serious difficulties as you set up

and use your Apex. But if anything out of the ordinary happens,

check this 

chapter for a solution. You can usually correct most

problems by adjusting a cable connection, repeating a software
procedure, or resetting the computer.

Use the suggestions in this chapter to help you solve most of
the problems that you may encounter. If the problem still exists,
call toll-free 1-800-922-891 1 for the location of your nearest
Epson Customer Care Center (24 hours a day, seven days a
week). You can also send any questions you have about the
Apex to Epson at the following address:

Epson America, Inc.
Product Support Department

23610 Telo Avenue

Torrance, CA 90505

When you contact Epson, please provide the serial number of
your computer, the configuration (Apex Plus or Apex Plus 20,
number of drives, type of monitor, option cards), and the
software you are using.

WARNING

If you need to turn off the computer for any reason, always wait

at least five seconds before turning it back on. You can damage

your computer if you turn it off and on rapidly.

Troubleshooting 5-1

Summary of Contents for Apex































































































































































Reviews:

No comments