Move the cursor to the desired communication speed and press
Enter.
To set the type of parity check, move the cursor to Parity and press
Enter.
The screen displays:
None
Odd
Even
Move the cursor to the correct type of parity check and press
Enter.
To change the data length, move the cursor to
Data length
and press
Enter.
The number changes to either 7 or 8, whichever was not displayed
before. Press
Enter
again if you want to reselect the previous number.
To change the number of stop bits, move the cursor
to Stop bits
and
press
Enter.
The number changes to either 1 or 2, whichever was not dis-
played before. To reselect the previous number, press
Enter
again.
When you finish changing serial port settings, move the cursor to the
Exit
option in the main Setup menu. Then exit the program as described in
the beginning of this chapter.
2-6
