INSTRUCTIONS FOR:
HEAVY-DUTY WORKSTATION WITH 5 DRAWERS,
BALL BEARING RUNNERS
MODEL
:
AP2050BB
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1.
SAFETY INSTRUCTIONS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2.
CONTENTS AND SPECIFICATION
1.1
GENERAL SAFETY
!
WARNING!
Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this workstation.
"
Locate workstation in a suitable working area.
"
Keep the work area clean, uncluttered and ensure there is adequate lighting.
!
WARNING!
Use workstation on level and solid ground, preferably concrete.
Avoid
tarmacadam since the workstation may sink into the surface.
"
Keep the workstation clean and tidy in accordance with good workshop practice.
"
Keep children and unauthorised persons away from the working area.
#
DO NOT
use the workstation for any purpose other than that for which it is designed.
#
DO NOT
exceed maximum capacity of workstation.
#
DO NOT
undertake work on the workstation without the workpiece being adequately secured.
Use clamps or a vice (not included) to secure the workpiece. Available from your Sealey dealer.
#
DO NOT
use the workstation out of doors.
#
DO NOT
get the workstation wet or use in damp or wet locations or areas where there is
condensation.
#
DO NOT
clean the workstation with any solvents which may damage the paint surface or the
protective coating on the wooden top.
#
DO NOT
pull out all drawers at the same time.
!
Maximum weight for each drawer is 25 kg, full load for workstation is 250kg.
AP2050BB - 1 - 260407
2.1
Powder coated steel panels with 25mm wood laminate top. Five drawers. Supplied flat packed.
2.2
Table Size (W x D): 838 x 508mm
Working Height: 865mm
Capacity: 250kg
2.3
Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
A . . . .SIDE PANEL
H . . . .RIGHT SIDE PANEL
P . . . . .WOODEN TOP
T . . . . .ADJUSTABLE LEG LEVELLER
C . . . .BOTTOM RAIL
J . . . . .BACK PANEL
Q. . . . .LEFT SIDE RUNNER U . . . . .HEX HEAD SCREW 5/8"
D . . . .TOP RAIL
M . . . .DRAWER
R . . . . .RIGHTSlDE RUNNER
G . . . .LEFT SIDE PANEL
O . . . .CORNER BRACE
S . . . . .SCREW (M5x12)
. . . . . .
