Unable to store form overlay data on the optional CompactFlash memory. Either the CompactFlash
memory is not installed correctly, or the maximum number of form overlay files has been reached.
Confirm that the optional CompactFlash memory is installed correctly, or delete any form overlay
files you no longer need, and then try storing the new overlay again.
To clear this error, select
Clear Warning
from the control panel’s
Reset Menu
. For instruction
about accessing the control panel menus, see “How to access the control panel menus” on page 60.
Form Feed
The printer is ejecting paper due to a user request. This message appears when pressing the
Start/
Stop
button once to make the printer offline, then holding down the
Start/Stop
button for more than
2 seconds in order not to receive form feed command.
Format Error ROM A
An unformatted ROM module has been inserted.
To clear this error, either press the
Start/Stop
button or turn off the printer and remove the ROM
module, then reinstall the ROM module. If that fails to clear the error, contact your dealer.
Format Required
The installed CompactFlash memory needs to be formatted to use it with the printer.
Select
Yes
to format the memory, or select
No
to cancel formatting. If you select
No
,
CompactFlash
Error
is displayed and you cannot use the memory for the printer. In that case, turn off the printer and
remove the CompactFlash memory.
Formatting CF
The CompactFlash memory is being formatted.
Fuser Needed Soon
This message indicates that the fuser unit is near the end of its service life. You can continue to print
until the
Replace Fuser
message appears.
To clear this warning message and continue printing, select
Clear All Warnings
from the control
panel’s
Reset Menu
. For instruction about accessing the control panel menus, see “How to access the
control panel menus” on page 60.
Image Optimum
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel
95
