Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job, Verify Job, and Stored Job options of
the Reserve Job function can be printed and deleted using the control panel’s
Quick Print JobMenu
.
Jobs saved using the Confidential Job option can be printed from the
ConfidentialJobMenu
. Follow
the instructions in this section.
Note:
❏
The
RAM Disk
setting on the control panel must be set to
Normal
or
Maximum
to use the Reserve Job
function. We recommend installing optional memory to use this function. For instructions about
increasing your printer’s memory, see “Installing a memory module” on page 124.
❏
Installing CompactFlash memory on your printer also enables the Reserve Job function. Note that
the RAM disk is not available when you install CompactFlash memory on the printer.
Using the Quick Print Job Menu
Follow the steps below to print or delete Re-Print Job, Verify Job, and Stored Job data.
1. Make sure the LCD panel displays
Ready
or
Sleep
, then press the
r
Right
button to access the
control panel menus.
2. Press the
d
Down
button repeatedly until
Quick Print JobMenu
appears on the LCD panel,
then press the
r
Right
button.
3. Use the
d
Down
or
u
Up
button to scroll to the appropriate user name, then press the
r
Right
button.
4. Use the
d
Down
or
u
Up
button to scroll to the appropriate job name, then press the
r
Right
button.
5. Press the
r
Right
button, then use the
d
Down
and
u
Up
buttons to select the number of copies.
To delete the print job without printing any copies, press the
d
Down
button to display
Delete
on
the LCD panel.
6. Press the
r
Right
button to start printing or to delete the data.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel
105
