Epson Aculaser 2600 Series, Service Manual

Page: 7 / 454

Handling Parts
Handling Consumables
Irregular Use of the Printer
W A R N I N G
„
Be careful not to throw out your back when handling heavy parts while taking care not to drop those parts.
„
Always wear gloves to perform maintenance work since the printer has many sharp edges.
„
Do not work with wet or oily hands, or may cause you to drop parts or affect the function of the printer.
„
Use only specified genuine parts for maintenance.
„
Do not repair or replace the ICs and other electrical components on the power circuit board (including fuse) under any circumstances.
W A R N I N G
„
To avoid dust explosion or ignition, never bring any consumables close to flame or throw them into fire.
„
Take extra care not to inhale the developing powder (such as toner), and get it into your mouth and eyes. Use extreme caution to avoid injury of yourself
and anyone around you.
„
Before starting your work, spread a sheet of paper over the working place to prevent interior of the product and the place becoming tainted.
„
If the developer or oil adheres to your skin or clothes, wipe it off thoroughly with dry rags before rinsing with water.
„
Do not disassemble the toner cartridges.
„
To prevent ignition, explosion, burn, injury, etc., do not use a general vacuum cleaner for
cleaning dropped toner. (To do so may cause the toner to catch fire by sparks in the vacuum
cleaner.)
00000301
W A R N I N G
„
Cautions when performing work with covers or parts removed
•
As a general rule, do not power the printer while covers or parts are removed.
•
If you need to remove covers or parts from the printer with power applied, take care of your fingers and clothes so as not to get entangled by moving
parts such as the driving belt, gears, and fans.
„
Altering the printer is banned under any circumstances.