Epson Aculaser 2600 Series, Service Manual

Page: 54 / 454

EPSON AcuLaser C2600/2600 Revision B
Product Description Control Panel 54
Support Menu *
1
Note *1: Displayed only when the “Support Mode” has been activated by a special operation
when the power is turned on.
*2: Displayed and executable only when the optional HDD unit is installed.
*3: Default switching time to Sleep Mode is 30 minutes.
Sleep Mode cannot be disabled by panel setting.
*4: Cannot be set with EJL and MIB.
Printer Adjust Menu *
1
Note *1: Displayed only when the “Support Mode” has been activated by a special operation
when the power is turned on.
This menu is not localized.
*2: Adjusts the secondary transfer bias. The setting value is held by the engine.
If this setting value is changed, the printer reboots after the setting is changed and exits
the menu.
*3: Set the highland support mode. 1: Highland mode, 0: Normal mode.
If this setting value is changed, the printer reboots after the setting is changed and exits
the menu.
*4: If this setting value is changed, the printer reboots after the setting is changed and exits
the menu.
Setting Value
HDD Format *
2
–
PS3 HDD Init *
2
–
Sleep Mode *
3
5, 15, 30 , 60, 120, 180, 240Min
LCD Backlight *
4
Auto , On, Off
Setting Value
Normal *
2
-4 ~ 5
Normal Back *
2
-4 ~ 5
Thick *
2
-4 ~ 5
Trnsprnc *
2
-4 ~ 5
Envelop *
2
-4 ~ 5
Highland *
3
0, 1
Feed Offset * 4 0 ~ 5 ~ 15
Scan Offset *
4
-3.5 to 0.0 to 3.5 step 0.5 mm
Feed Offset2 *
4
-3.5 to 0.0 to 3.5 step 0.5 mm
Scan Offset2 *
4
-3.5 to 0.0 to 3.5 step 0.5 mm