Note
The 3.5-inch drive in the lower bay of your computer is
drive A. If you install another drive in the upper bay, it is
drive B. You can change the drive assignments through your
SETUP program.
To insert a diskette into a 5.25-inch drive, hold the diskette with
the label facing up and the read/write slot leading into the
drive. Slide the diskette into the drive and then turn down the
latch to secure it.
When you want to remove the diskette, make sure the drive
light is off; then press the release button or turn the latch.
Remove the diskette and store it properly.
Caution
Never remove a diskette or reset or turn off the computer
while a diskette drive light is on. You could lose data. Also,
remove all diskettes before you turn off the computer.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you have entered an MS-DOS or application
program command that you want to stop, try one of the
following:
Press
P a u s e
Hold down
Ctrl
and press C
Hold down
Ctrl
and press
B r e a k .
Using Your Computer
2-3
