`Defining your own drive type
If the parameters for your hard disk do not match the
parameters detected by the auto-sensing feature, or if you want
to use your drive with parameters other than the defaults,
follow these steps to define your own type:
1.
Move the cursor to Hard Disk 1 or
2
and press + or -until
you see User Def 1 or User Def 2.
2.
Press to move the cursor to the Cy1 field.
3.
Type the appropriate cylinder value for your hard disk. The
documentation that came with your hard disk drive will
provide the parameter information you need.
4.
Continue pressing to move the cursor to the next field
and type in the appropriate values.
Checking System Memory
When you boot your system, the system BIOS detects the type
of RAM and updates the base memory size and the extended
memory size automatically. You see the memory configuration
displayed on this SETUP screen.
Setting the Video Display Type
The Video Card option lets you define the type of adapter
you are using for your primary display. If you connected your
monitor to the computer’s built-in VGA port, select
V G A
/
E G A
.
If you installed an optional video card, follow the guidelines
below to select the correct adapter type.
1-14
Setting Up Your System