manualshive.com logo in svg

Epson ActionLaser Plus, User Manual

The Epson ActionLaser Plus is an innovative printer designed to meet your business printing needs. With its high-quality printing capabilities, this product ensures crisp and clear documents every time. For your convenience, a comprehensive User Manual is available for free download at manualshive.com, providing step-by-step instructions and guidance.

Share
Download
background image

Printing Problems

Problem

Solution

The printout is not

what you expected.

The font selected by

your software cannot

be printed.

Completely blank pages

are printed.

Make sure that all of the attributes of the

requested font match the attributes of an

available font. (These attributes include

orientation, symbol set, spacing, pitch,

point size, style, weight, and typeface.)

Otherwise, a font you don’t expect may

be selected. For example, simply

requesting a typeface or point size may

not be sufficient to select the desired font.

Your software may be overriding the font

chosen 

with SelecType. Make sure your

software settings match the settings in

SelecType. Also, the font selected by your

software may not be available. Be sure

you have installed the correct font

cartridge or have downloaded the correct

soft font.

Run a status print test (as described in

Chapter 2) to check that the interface

configuration for your computer matches

the SelecType settings. Change the

SelecType settings if necessary.

If blank pages continue to print, check to

be sure the drum unit is installed

properly. If the problem persists, replace

the drum and drum replacement

cartridge as described in Chapter 6.

7-16

Troubleshooting

Summary of Contents for ActionLaser Plus
















































































































































































































































Reviews:

No comments

Related manuals for ActionLaser Plus

Canon FaxPhone L120 Starter Manual preview
FaxPhone L120
Brand: Canon Pages: 11
Canon imageRUNNER ADVANCE 8085 Maintenance Manual preview
imageRUNNER ADVANCE 8085
Brand: Canon Pages: 176
Canon FaxPhone L120 Software Manual preview
FaxPhone L120
Brand: Canon Pages: 85
Canon imageRUNNER 5070 Specification preview
imageRUNNER 5070
Brand: Canon Pages: 4
Canon imageRUNNER 5570 Specification preview
imageRUNNER 5570
Brand: Canon Pages: 4
Canon IMAGERUNNER 7095 PRINTER Brochure & Specs preview
IMAGERUNNER 7095 PRINTER
Brand: Canon Pages: 8
Canon IMAGERUNNER 7105 Service Manual preview
IMAGERUNNER 7105
Brand: Canon Pages: 21
Canon FaxPhone L120 Advanced Manual preview
FaxPhone L120
Brand: Canon Pages: 58
Canon IMAGERUNNER ADVANCE C5051 Manual preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 12
Canon imageRUNNER ADVANCE C2020 Setup Manual preview
imageRUNNER ADVANCE C2020
Brand: Canon Pages: 68
Canon imageRUNNER ADVANCE 6055 Maintenance Manual preview
imageRUNNER ADVANCE 6055
Brand: Canon Pages: 134
Canon Color imageRUNNER LBP5970 Getting Started Manual preview
Color imageRUNNER LBP5970
Brand: Canon Pages: 67
Canon FAXPHONE L170 - B/W Laser - Copier Starter Manual preview
FAXPHONE L170 - B/W Laser - Copier
Brand: Canon Pages: 12
Canon FAXPHONE L100 Technical Information preview
FAXPHONE L100
Brand: Canon Pages: 2
Canon imageRunner 1133 Starter Manual preview
imageRunner 1133
Brand: Canon Pages: 60
Canon Color imageCLASS MF8280Cw Getting Started Manual preview
Color imageCLASS MF8280Cw
Brand: Canon Pages: 36
Canon FAX-L380 Software Manual preview
FAX-L380
Brand: Canon Pages: 104
Canon imagePROGRAF iPF8300 Setup Manual preview
imagePROGRAF iPF8300
Brand: Canon Pages: 16

Brands by name

Popular brands

Load more brands