Epson ActionLaser 1000, User Manual

Page: 56 / 70

INIT : x SCRPT2
This status message appears when the printer is initializing the
EpsonScript emulation mode.
SERVICE REQ. POxxx
This error message, which rarely occurs, appears when the
printer cannot continue developing the print data. If this
message is displayed, reset your printer as described in your
printer manual.
Notes:
If the SET FULL PRINT error message is displayed, change the
PRlNT MODE setting in SelecType Level 1 from BAND to
PAGE. If the page still does not print, the print job is too complex
to print with your printer's current memory. Try simplifying the
page by reducing the number and size
of fonts
or graphics
or add
more memory.
If your printer prints
VM error
on the error sheet, you should
increase your printer’s memory. The
VM error
occurs when you
do not have enough memory to print the data.
5-6 EpsonScript SelecType Settings