Epson ActionLaser 1000 User Manual Download

Page: 11 / 70

Unsupported software programs

The following programs are not supported by EpsonScript:

LaserTalk™

SmartArt™

Because of differences in type design, the TrueType® fonts

printed by your printer might not exactly match fonts printed

by an Apple LaserWriter IIg.

Care and handling

Follow these guidelines when using the EpsonScript option:

Do not drop or bend the option.

Do not store the option in direct sunlight or near a heat

source.

Make sure the printer is turned off when you insert or

remove the option; otherwise, you can damage the option

or the printer.

Do not touch the connectors. If the connectors become

dirty, clean them by wiping the edge with a clean tissue.

Do not use water, alcohol, or other solvents.

Introduction 5

Summary of Contents for ActionLaser 1000







































































Search results

Summary of Contents for ActionLaser 1000

Reviews:

Related manuals for ActionLaser 1000

Brands by name

Popular brands

Epson ActionLaser 1000, User Manual

Search results

Summary of Contents for ActionLaser 1000

Reviews:

Related manuals for ActionLaser 1000

Brands by name

Popular brands