24
Solving Problems
Problems and Solutions
No Sound
■
Make sure that the transmitter is turned on.
■
Try adjusting the volume on your home theater system. If you’ve connected
the Wireless Audio Set to a pair of unpowered speakers, adjust the volume
control on the receiver.
■
Make sure that all of the audio cables are securely connected.
■
Make sure that your Epson MovieMate has been configured for your audio
device as described on page 17.
■
Make sure that the settings on your audio system are configured correctly for
the type of audio you are transmitting. See the documentation for your audio
system for details.
■
The transmitter’s batteries may not be installed correctly or may be low on
power. To change the batteries, see page 7.
Poor Sound Quality
■
Make sure that the transmitter and receiver are less than 19.7 feet (6 meters)
apart and that there is direct line of sight between the antennas.
■
If the
LINK
lights are flashing, make sure that the transmitter and receiver are
no further than 19.7 feet (6 meters) and that there is a direct line of sight
between their antennas.
■
The transmitter’s batteries may be low on power. To change the batteries,
see page 7.
Joplin.book Page 24 Monday, September 18, 2006 2:43 PM
