Connecting the Audio Set Receiver
15
2. Connect the audio cable to the receiver, then connect the other end to your
audio system as shown below.
Note:
Use
only one
audio cable to connect the receiver to your audio system.
Make sure that you configure your audio system to use the input source you connected
the receiver to.
When you’re finished connecting the audio cable, do one of the following:
■
If you connected the transmitter to an Epson MovieMate, see page 17.
■
If you connected the transmitter to a DVD player, see page 18.
Optical
Coaxial
CD/DVD
Optical audio cable
Coaxial
audio cable
RCA cable
(stereo)
Audio system
Receiver
Joplin.book Page 15 Monday, September 18, 2006 2:43 PM
