18
Setting Up
Configuring Your DVD Player
Some DVD players may require you to go into a setup or configuration menu to
activate the optical or coaxial audio port and select audio setting for it. Refer to the
documentation for your DVD player to select the setting that matches the type of
connection you used to connect the receiver to your audio system from the table
below.
Note:
Your DVD player’s settings may differ from the ones shown above. Refer to the
documentation for your DVD player to select an equivalent setting.
You’re finished setting up the Wireless Audio Set. See “Using the Wireless Audio
Set” on page 19.
Connection
Setting
Optical
SPDIF/DOLBY/DTS
Coaxial
SPDIF/DOLBY/DTS
RCA
PCM or STEREO
Speaker wire
PCM or STEREO
Joplin.book Page 18 Monday, September 18, 2006 2:43 PM
