Configuring Your Epson MovieMate
17
Configuring Your Epson MovieMate
1. Turn on your Epson MovieMate.
2. Press the
Setup
button on the remote control.
3. Press the button to highlight
and display the
AUDIO
setup menu.
4. Press the
or
button to highlight
DIGITAL AUDIO OUTPUT
, then
press the
Enter
button.
5. Press the
or
button to select the setting that matches the type of
connection you used to connect the receiver to your audio system from the
table below, then press the
Enter
button.
6. Press
to highlight
DOWN MIX
, then press the
Enter
button.
7. Select the setting that matches the type of connection you used to connect the
receiver to your audio system from the table below, then press the
Enter
button.
8. When you have finished selecting settings, press the
Setup
button to exit
the menu system.
You’re finished setting up the Wireless Audio Set. See “Using the Wireless Audio
Set” on page 19.
Connection
Setting
Optical
STREAM/PCM
Coaxial STREAM/PCM
RCA
PCM ONLY
Speaker wire
PCM ONLY
Connection
Setting
Optical
DOLBY SURROUND
Coaxial
DOLBY SURROUND
RCA
STEREO
Speaker wire
STEREO
Joplin.book Page 17 Monday, September 18, 2006 2:43 PM
