66
Fine-tuning the Projector
4. If you want to disable the password temporarily, select
Timer
and
press
Enter
. Then hold down the
Num
button while you use the
numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to
0H
. Press
Enter
when you’re done.
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
Time elapsed
.)
5. To enable your screen logo, select
User’s Logo Protect
and press
Enter
. Select
ON
and press
Enter
.
When this feature is on the logo appears whenever the projector is
turned on (if the
Startup Screen
is enabled in the Extended
menu; see page 59) and as the A/V Mute screen (if you selected
the
Logo
as the
Background Color
in the Extended menu).
None of the User’s Logo features can be changed when the User’s
Logo Protect function is enabled.
6. Press
Menu
to close the Password Protect menu.
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
When the period defined in the
Time-elapsed
setting has passed, and
the password is entered correctly, the elapsed time will be reset to
0
and the countdown will start again. Remember to disable or change
this setting when you need to.
Starting the Projector with a Password
When the password function is enabled, you see this screen when you
turn on the projector:
note
If you make a mistake
entering the time, press the
Esc
button and enter the
time again.
Summary of Contents for 821p - PowerLite XGA LCD Projector
Page 1: ...Epson PowerLite 821p Multimedia Projector User sGuide ...
Page 106: ...106 Notices ...
Page 112: ...112 Index ...
