Fine-tuning the Projector
65
Setting a Password
1. Press the
Freeze
button on the remote control for about 5 seconds
until you see the Password Protect menu:
2. Select
Password
and press
Enter
. You see the message
Change
the password?
3. Select
Yes
and press
Enter
.
4. Hold down the
Num
key on the remote control and use the
numeric keypad to enter a 4-digit password.
The password will be displayed as
****
. After you enter the last
digit, a confirmation screen appears. Enter the password again.
5. After you finish setting the password, press the
Esc
button to
return to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.
Turning On the Password and User’s Logo
1. To enable the password, press the
Freeze
button on the remote
control for about 5 seconds until you see the Password Protect
menu
2. Select
Power ON Protect
and press
Enter
.
3. Select
ON
and press
Enter
. Then press
Esc
.
note
If a password has already
been set, you see the
Password Protect Release
screen. See “Starting the
Projector with a Password”
on page 66.
Use these buttons like a
numeric keypad to enter
the password
Hold down this button to
activate the numeric
keypad
Summary of Contents for 821p - PowerLite XGA LCD Projector
Page 1: ...Epson PowerLite 821p Multimedia Projector User sGuide ...
Page 106: ...106 Notices ...
Page 112: ...112 Index ...
