Epson 821p - PowerLite XGA LCD Projector, User Manual

Page: 63 / 114

Fine-tuning the Projector
63
If you assign the projector a password, a screen appears requesting the
password whenever the projector is turned on. If you enter the
password incorrectly three times in succession, the projector’s
operation is locked and you’ll need to disconnect the power cord, then
reconnect it to redisplay the password screen. If you enter the
incorrect password 30 times in succession, the projector is locked and
you’ll need to contact Epson to unlock it. See “Where To Get Help”
on page 91.
If someone else will be using the projector for awhile but you want to
make sure that person returns it by a certain time, you can temporarily
disable the password for a set period. When that time has elapsed, the
password is reactivated and must be entered before the projector can
be used.
When you enable the Operation Lock feature, all of the projector’s
buttons are disabled except the
P
Power
button.
Creating Your Own Screen Logo
You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the A/V Mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the “User’s Logo.”
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from either a computer or video source, such as a VCR.
2. Press the
Menu
button and select the
Extended
menu.
note
If you enable the password
before you set one and you
see the prompt to enter the
password, enter the default
password
0000
to proceed.
note
If the
User’s Logo Protect
option is
ON
, you see a
message that the logo cannot
be recorded. You’ll need to
disable the
User’s Logo
Protect
option before you
can create or change the
user’s logo. See page 65.