Epson 821p - PowerLite XGA LCD Projector User Manual Download Page 31

Page: 31 / 114

Projecting

3. Connect the other end to an electrical outlet.

The

Power

light on top of the projector turns orange, indicating

that the projector is receiving power but not yet turned on. Wait
until the light stops flashing but stays orange.

4. Turn on your computer or video source if you have not already.

5. Press the

Power

button on top of the projector to turn it on.

(You can also press the

Power

button on the remote control.)

The projector beeps and the

Power

light flashes green as the

projector warms up. The projector lamp comes on in a few
seconds. When the

Power

light stops flashing, you’re ready

to start.

6. If you don’t see your image, press the

Source

button on

the projector or remote control repeatedly until you see it.

(Windows only: If you see a message saying that Windows has
found a plug-and-play monitor, click

Cancel

7. If you are prompted to enter a password, see page 66.

To focus and adjust the image, see page 35. If a projected image fails
to appear even after you press the

Source Search

button, see “What

To Do If You See a Blank Screen” on page 33.

note

If you are using the remote
control for the first time, be
sure to insert the batteries as
described on the Quick
Setup sheet.

If the Direct Power ON
feature has been enabled (as
described on page 60), you
don’t need to press the

Power

button to turn the

projector on. Just plug the
projector into an electrical
outlet. When the

Power

light stops flashing and stays
green, the projector is ready to
use.

Projector

Remote control

Power button

warning

Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.

Summary of Contents for 821p - PowerLite XGA LCD Projector



















































































































Search results

Summary of Contents for 821p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 821p - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 821p - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 821p - PowerLite XGA LCD Projector

Reviews:

Related manuals for 821p - PowerLite XGA LCD Projector

Brands by name

Popular brands