Projecting a Presentation
31
Operating the Projector with the Remote
Control
Before you can use the remote control, you need to install the
batteries, as described on page 9.
1. Push up the switch on the side of the remote control to
turn it on.
2. Press the round light
button. The other buttons on the
remote light up temporarily. If they don’t light up, you
need to change the batteries. See page 9 for instructions.
3. Point the remote at the projector or at the screen.
4. Press the button for the function you want to use. See pages
33 to 39 for more information.
For some functions, you need to use the
Enter
button to
navigate on the screen. Press on the edge of the button with
your thumb. Or, grasp it between your thumb and finger
and tilt it in the direction you want to move.
5. To access additional buttons, pull down the cover below
the
Esc
button.
The additional buttons on the lower part of the remote are
shown at the left. See pages 33 to 36 for instructions on
using these buttons to control the projector.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
ON/OFF
switch
light
button
cover
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
Help
-
additional
remote
control
buttons
