22
Getting Started
Turning the Projector On and Off
After you have connected your computer and other equipment,
you can plug in the projector and turn it on.
1. Connect the power cord to your projector’s power inlet.
2. Plug the other end of the cord into a grounded electrical
outlet.
The power light on top of the projector turns orange. This
indicates that the projector is receiving power, but is not yet
turned on.
3. Use the tab on the lens ring to rotate the ring and pop out
the lens.
note
You can connect a
Kensington anti-theft device
(available from computer
stores) to the port on the side
of the projector.
power light
Kensington
lock port
tab
