Getting Started
23
4. Squeeze the lens cap tabs and remove the lens cap.
5. Press the red
Power
button on top of the projector.
The power light flashes green, and then stays on. You may
see a blue screen with the message
No Signal
displayed.
This is normal.
6. Turn on or restart your computer. In a few moments, you
should see the computer display projected.
You may need to press a function key on your laptop to
switch between the LCD screen and the projector, or to
display on both at the same time. Check your laptop’s
manual or online help for instructions.
On a PowerBook, you’ll need to choose
Mirroring
in the
Display Control Panel of your PowerBook if you want to
display on the LCD screen as well as the projector screen.
Squeeze here
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and
is especially dangerous for
children.
power light
power
button
