Projecting a Presentation
33
Zooming Your Image with the
Remote
The lens ring lets you reduce your image if it’s too large. You
can zoom in on a portion of the image using the
E-Zoom
button on the remote control.
1. Press the right side of the
E-Zoom
button to zoom in on
your image.
■
Press the button repeatedly to enlarge it up to 4 times
in 25% steps.
■
Press and hold the button to zoom in to the size you
want.
2. Use the
Enter
button to pan around the screen if necessary.
3. Press the left side of the
E-Zoom
button to zoom out. You
can press the button repeatedly, or press and hold to zoom
all the way out.
Resizing Your Image
If only part of your computer screen is displayed, your
computer may be set for a higher resolution than the projector’s
“native” display—1024
×
768 pixels (PowerLite 700c/710c) or
800
×
600 pixels (PowerLite 500c). You can resize the image to
fit the resolution of your projector.
■
Press the
Resize
button on the lower part of the remote
control. The screen image is automatically compressed.
■
Continue pressing the
Resize
button to pan around the
screen in the original resolution.
If you have zoomed in on your image, you can also use the
Resize
button to switch it back to the original display size.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2
4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
Help
-
Resize
Zoom in
or out
note
When you’re projecting
from a VCR or other video
source, you can use the
Resize button to switch from
a 4:3 aspect ratio to 16:9.
