Epson 5000XB - PowerLite SVGA LCD Projector User Manual Download Page 92

Page: 92 / 124

4 • Using the ELP Link II Software

2. Click on the tab for the settings you want to adjust.

3. Change one or more of the following options.

Computer Tab

Video Tab

Option Description

Brightness Adjusts screen brightness.

Contrast Adjusts screen contrast.

Sync Adjusts the sych (synchronization) to remove screen flicker.

Tracking Adjusts tracking to remove horizontal lines.

Position Adjusts the horizontal and vertical screen position.

Color Adjusts the balance of red, green, and blue in the image.

Pattern
Display

Displays the test pattern currently selected.

Reset Resets all fields to their default values.

Option Description

Brightness Adjusts screen brightness.

Contrast Adjusts screen contrast.

Saturation Adjusts the color saturation.

Tint Adjusts the color tint. (NTSC only)

pro-ch4.fm Page 74 Monday, November 10, 1997 1:37 PM

Summary of Contents for 5000XB - PowerLite SVGA LCD Projector





























































































































Search results

Summary of Contents for 5000XB - PowerLite SVGA LCD Projector

Reviews:

Related manuals for 5000XB - PowerLite SVGA LCD Projector

Brands by name

Popular brands

Epson 5000XB - PowerLite SVGA LCD Projector, User Manual

Search results

Summary of Contents for 5000XB - PowerLite SVGA LCD Projector

Reviews:

Related manuals for 5000XB - PowerLite SVGA LCD Projector

Brands by name

Popular brands