Installing the Software
61
2. In the Windows Program Manager, click on the File menu, then
on Run. The Run dialog box appears:
3. Type
A:\SETUP
(or
B:\SETUP
as appropriate), then press Enter
or click OK. The ELP Link II introduction appears. Press
C
to
continue.
4. To accept the default location for where the software should be
installed, press
C
to continue. Otherwise, enter a new directory
name and then press
C
.
5. The Link II software communicates with the projector using the
computer’s serial communication (COM) port. Specify which
COM port to use, then press
C
to continue. (Most likely, your
computer is using COM 1.)
6. A summary screen appears stating how much free hard disk space
is required to run the software and how much is available. If
sufficient disk space is available, press
C
. Otherwise, press
X
(exit)
to free up some disk space; then return to step 1.
7. You see a prompt to create the installation directory you specified
in step 5. Press
Y
(yes).
pro-ch4.fm Page 61 Monday, November 10, 1997 1:37 PM
Summary of Contents for 5000XB - PowerLite SVGA LCD Projector
Page 1: ...EPSON PowerLite 7000XB 5000XB User s Guide pro insd fm Page i Friday November 7 1997 5 20 PM ...
Page 8: ...viii 7000xbTOC fm Page viii Friday November 7 1997 5 21 PM ...
Page 76: ...3 Using the Projector Menus 58 pro ch3 fm Page 58 Friday November 7 1997 5 23 PM ...
Page 98: ...4 Using the ELP Link II Software 80 pro ch4 fm Page 80 Monday November 10 1997 1 37 PM ...
