Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer Printer Manual Download Page 53

Page: 53 / 160

2-53

Handling Paper and Other Media

8. Move the paper lever to the secured position. The printer automatically

positions the paper for printing.

9. Raise the roll paper support. Make sure the paper is on top of the guides.

10. Close the roll paper cover.

To avoid indenting or creasing the paper, remove it from the paper path and
roll it up when you are not printing.

Note:

The maximum

length of roll paper you
can print on is limited by
the printer driver, and
may also be limited by
your application software
and/or operating system.

sp4800Guide.book Page 53 Tuesday, March 7, 2006 3:49 PM

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

































































































































































Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands

Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands