Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Printer Manual

Page: 11 / 160

11
Introduction | 11
Before you call, make sure you have your Unit ID number, which is
included with the Epson Preferred Protection Plan information that came
with your printer. You’ll also need your printer serial number and proof of
purchase.
Epson also provides technical assistance 24 hours a day through the World
Wide Web. You can reach Epson Support at http://support.epson.com. At
this site, you can download drivers, firmware, and other files, look at product
documentation, access troubleshooting information, and receive technical
advice through e-mail.
You can purchase genuine Epson ink and paper from an authorized Epson
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
In the U.S., you can also purchase online at www.epsonstore.com. In
Canada, you can also purchase at www.epson.ca or 800-807-7766.
Macintosh System Requirements
To use your printer in either a stand-alone or peer-to-peer network
environment, your Macintosh
® system should include the requirements
listed below:
•
Mac OS X 10.3.9 or later
•
1.25 GHz or higher processor (G5 recommended)
•
At least 1GB of RAM
•
At least 60MB of free hard disk space to install the software, and at least
2GB of free hard disk space for processing files (8GB or more available
hard disk space recommended)
•
Quad-speed (4×) or faster CD-ROM or DVD drive for installing the
printer software
•
For USB connection: a compliant USB 2.0 port and a shielded USB
“AB” cable from Series A (computer) to Series B (printer), up to 10 feet
long
•
For IEEE 1394 (FireWire) connection: a shielded IEEE 1394 cable up
to 10 feet long
•
For network connection: the optional Ethernet card (described on
page 10) and a compatible cable
Tip: If you experience
difficulty with the
toll-free line or your
Unit ID number, call
(562) 276-1305.
Caution: Using an
improperly shielded
cable—especially a
cable more than 10 feet
long—may cause the
printer to malfunction.
Note: USB 2.0 is
required to allow the
printer to run at full
speed.
sp4800Guide.book Page 11 Tuesday, March 7, 2006 3:49 PM