Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer Printer Manual Download Page 115

Page: 115 / 160

5-115

Maintaining and Transporting the Printer

115

Installing the New Black Ink Cartridge

1. When draining is complete,

RAISE THE LEFT INK LEVER

appears on

the LCD. Raise the ink lever on the left ink compartment.

2. When

REMOVE CNVRSION CRTG

appears, remove the conversion

cartridges from the slots on the left ink compartment.

3. When

INSERT INK CRTG

appears, insert the cartridges in their

specified slots.

4. When

LOWER BOTH INK LEVERS

appears, lower the ink levers on the

right and left ink compartments.

5. When

RAISE BOTH INK LEVERS

appears, raise the ink lever on the

right and left ink compartments.

The printer starts charging ink. After a while, ink lever messages appear
on the LCD.

6. When a message appears on the LCD, raise or lower the ink levers

accordingly until

READY

appears on the LCD.

7. Because ink charging after black ink conversion consumes a large

quantity of ink, you may need to replace the ink cartridges soon.

When

READY

appears on the LCD, ink charging is complete.

8. If you have installed 110 ml ink cartridges, close the ink compartment

covers. If you have installed 220 ml ink cartridges, do not close the ink
compartment covers.

Note:

Because ink

charging after black ink
conversion consumes a
large quantity of ink, you
may need to replace the
ink cartridges soon.

sp4800Guide.book Page 115 Tuesday, March 7, 2006 3:49 PM

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

































































































































































Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands

Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands