Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer Printer Manual Download Page 15

Page: 15 / 160

Introduction

Ink Cartridge Safety Instructions

•

Keep ink cartridges out of the reach of children and do not drink the
ink.

•

Store ink cartridges in a cool, dark place.

•

If ink gets on your skin, wash it off with soap and water. If ink gets in
your eyes, flush them immediately with water.

•

Shake an ink cartridge well before installing it for best results.

•

Do not use an ink cartridge beyond the date printed on the cartridge
carton.

•

Use up the ink cartridge within six months of installation for best
results.

•

Do not dismantle the ink cartridges or try to refill them. This could
damage the print head.

•

Do not touch the ink supply port or its surrounding area and the green
IC chip on the side of the ink cartridge. Doing so may affect normal
operation and printing.

Caution:

Do not shake

cartridges (that have been
installed previously) with
too much force.

sp4800Guide.book Page 15 Tuesday, March 7, 2006 3:49 PM

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

































































































































































Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands

Epson 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer, Printer Manual

Search results

Summary of Contents for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Reviews:

Related manuals for 4800 - Stylus Pro ColorBurst Edition Color Inkjet Printer

Brands by name

Popular brands