The printer operation check page prints well, but nothing
prints from an application.
Cause
What to do
Your printer is not selected in
your software.
Select your printer in the printer setup
section of your software.
The interface cable does not
meet both the printer and
computer requirements.
Use a printer cable that meets the
requirements shown under “Interface
cables“ on page 1-4.
Your computer is not 100%
IBM
®
AT compatible.
Select
Use Print Manager for this port
in the Queue Setup window. To access
this window, double-click the
EPSON
Spool Manager4
icon in the EPSON
folder and select
Setup
from the
Queue menu.
Your computer system’s
memory is insufficient to
handle the volume of data in
your document.
Try reducing the image resolution of
your document in your image-editing
software.
Install more memory in your
computer if you can.
Select lower resolution or less colors
for your display setting as described
below.
For Windows 95, choose a lower
resolution setting as the Color Palette
setting. To access the Color Palette,
click
Start
, point to
Settings
, and
choose
Control Panel
. Then
double-click the
Display
icon and click
the
Settings
tab. For detailed
information on making this setting, see
your Windows 95 user’s guide.
L
Hawaii2 Ref. Guide
Rev.b
A5 size
Chapter 6
06-02-97
DR, pass 0
6-10
Troubleshooting
Summary of Contents for 400 Series
