Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials as
follows:
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not turn on the printer
and wait until the print head returns to the home position.
Turn off the printer and then close the printer cover.
c
Caution:
Leave the ink cartridges installed when you transport the
printer. Removing the cartridges during transport can
damage the printer.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the
paper support.
4. Push in the output extension tray, and then raise the output
tray.
5. Attach the protective materials to the printer.
6. Repack the printer and power cord in the original box.
7. Keep the printer level during transport.
L
Hawaii2 Ref. Guide
Rev.b
A5 size
Chapter 5
06-02-97
DR, pass 0
5-8
Maintenance and Transportation
Summary of Contents for 400 Series
