Epson 2070 - LQ B/W Dot-matrix Printer User Manual Download Page 20

Page: 20 / 168

If you plan to use a printer stand, follow these guidelines:

Use a stand that supports at least 26 kg (57.8 lbs).

Never use a stand that tilts the printer at an angle of more

than 15 degrees from horizontal. If you install a cut-sheet

feeder, the stand must keep your printer level.

If you plan to load continuous paper through the bottom of

the printer, choose a stand that provides an unobstructed

paper path.

Position your printer’s power cord and interface cable so

they do not interfere with paper feeding. If possible, secure

the cables to a leg of the printer stand.

Align the paper stack so that the paper feeds straight into

the tractor’s sprocket units.

Setting Up the Printer

1-3

Summary of Contents for 2070 - LQ B/W Dot-matrix Printer









































































































































































Search results

Summary of Contents for 2070 - LQ B/W Dot-matrix Printer

Reviews:

Related manuals for 2070 - LQ B/W Dot-matrix Printer

Brands by name

Popular brands

Epson 2070 - LQ B/W Dot-matrix Printer, User Manual

Search results

Summary of Contents for 2070 - LQ B/W Dot-matrix Printer

Reviews:

Related manuals for 2070 - LQ B/W Dot-matrix Printer

Brands by name

Popular brands