The printer sounds like it is printing, but nothing is printed.
The ribbon cartridge may not be installed properly. Follow the
steps in Chapter 1 to make sure it is installed correctly.
The ribbon may be worn out. Replace the ribbon cartridge.
The paper thickness lever may be set incorrectly. Make sure it
is set for the type of paper you are printing on.
The printer makes a strange noise, beeps five times, abruptly stops
printing, and all the control panel lights flash.
Turn off
the printer and let the print
head cool. Then, check for
a paper jam, a ribbon jam, or other problems. Try to print
again. If the printer still does not print correctly, contact your
dealer.
The printer beeps several times.
An error has occurred. Turn off the printer and turn it on again.
If the printer beeps three times, check to see if the paper has
run out or the printer cover is open.
If the printer beeps five times, check for a paper jam and make
sure the paper release lever is in the correct position.
If the printer beeps once, you may have tried an invalid control
panel operation. Review the control panel functions in Chapter 3.
If the printer still does not work correctly, turn it off and
contact your dealer or qualified service person.
6-4 Troubleshooting
Summary of Contents for 2070 - LQ B/W Dot-matrix Printer
