manualshive.com logo in svg

Epson 20020, 20040, User Manual

Share
Download
Epson 20020, 20040 User Manual Download Page 227

Glossary

Absolute pathname

A pathname that begins with the backslash character. An

absolute pathname tells MS-DOS how to find its way to a
given directory, starting at the root directory. See also Relative

pathname.

Application program

A software program designed to perform a specific task, such as
a word processing or spreadsheet program.

ASCII

American Standard Code for Information Interchange. A
standardized coding system for representing characters, such as
numbers, letters, and graphic symbols. An ASCII character
occupies one byte of storage. Files transmitted in ASCII code
can be used by many different computers, printers, and

programs.

Asynchronous

A method of data transmission in which one machine sends
data one character at a time to another, without either
machine preparing for the transmission.

AUTOEXEC.BAT file

The batch file that is executed automatically when you load
MS-DOS. See also Batch 

file.

Backup

An extra copy of a program, data file, or disk, kept in case your
working copy is damaged or lost.

Glossary 1

Summary of Contents for 20020, 20040




























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands