Adjustment
Rev. A
4-9
4.1.6 BK-M Height Adjustment
This adjustment is needed when the black/color head or both heads are removed or disassembled. With
this operation, the vertical position for the black and color head are aligned. To make the adjustment,
adjust the vertical position for the color heads based on the black head position by moving the head
vertical adjust lever.
1.
Connect the printer and the host computer with a parallel interface cable.
2.
Run the adjustment program in the host computer.
3.
Input the customer data. (Refer to Section 4.1.2.)
4.
Move the cursor using
or
key to select
“ADJUST”
in the 1st menu. Then press
the
Enter
key, and
the main menu appears on the monitor.
5.
Move the cursor using
or
key to select
“BK-M HIGHT ADJUSTMENT”
. Then press the Enter key, and
the printer prints out the BK-M height adjustment patterns.
6.
Make the adjustment by moving the head vertical adjust lever, as shown in Figure 4-7.
7.
Press Space key to repeat the operation. Press the Enter key to exit
“BK-M HIGHT ADJUSTMENT”
, and
the main menu appears.
8.
Select other adjustment using
or
key, or select “
RETURN TO 1st MENU”
to exit the main menu.
9. Move the cursor using
or
key to select
“END”
and press
the
Enter
key to exit the adjustment
program.
While moving the head vertical adjust lever, lift it up a little. When fixing it, make sure that the
notches of the lever are securely engaged with the location holes on the CR unit so that the lever
does not move.
Start
Print out the head vertical
adjustment patterns.
Are there gaps?
Direction?
Press the Enter key.
B
C
B
P*
Move the lever to front.
Enter the Space key.
P*
Black
Color
Black
Head Vertical
Adjust Lever
Yes
No
End
Move the lever to rear.
P*: Paper feed direction
P*: Paper feed direction
Figure 4-7. BK-M Height Adjustment Flow Chart
CAUTION
Summary of Contents for 1520 - Stylus Color Inkjet Printer
