Product Information
PSC SVC
______________________________________________________________________________
Subject
to
modification
due
to
technical
davance!
95.700.007.D.E
/
2015
‐
04
3
1 Safety
notes
Always consider the following points:
The manual clamping unit PSC SVC is only designed for static operation -
no rotation allowed!
Only use technically perfect tools!
Coolant
Guidelines and technical specifications for the coolant use in the machine:
Coolant use must conform to the current regulations of the legislation and the
professional
association.
Furthermore, you must only use coolants which conform with the specs listed on
the
table
below.
Do not use tap water. Tap water drastically reduces the pH-value and causes
corrosion on the uncoated parts, which often goes unnoticed, but later causes
severe corrosion damage
OTT JAKOB is not responsible for damages if inappropriate coolants are used!
Notes:
In order to further improve the product, changes of design, function and
accessories are subject to change without notice.
The content of this user manual or possible errors in the text can not be used to
claim any damages.
Errors excepted!
Parameter / test procedure
Limited values
Corrosion protection according to
No corrosion after 2 hours
DIN 51360 section 2
Elastomer compatibility
No change of the shore hardness and/or
the elongation
OTT-JAKOB applies FKM (VITON®)
Nonferrous metal compatibility
No corrosion on copper, brass and
aluminium
parts
Glue residue after slow evaporation Non sticky!
at 50 degrees
No residue!“
Easily removable.
