BIOS
EP-MVP3C/2
Page 4-9
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power manage-
ment parameters and IRQ signals. In general, these parameters should not be changed
unless it’s absolutely necessary.
Figure 5: Power Management Setup
You can only change the content of Doze Mode, Standby Mode, and Suspend Mode
when the Power Management is set to ‘User Define’.
Power Management: Use this to select your Power Management selection.
The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN), and
the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each
mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in each
mode.
User define: Allows user to define PM Timers parameters to control power
saving mode.
ROM PCI/ISA BIOS (2A5LEPA9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
: User Define
Primary INTR
: ON
PM Control by APM
: Yes
IRQ3 (COM 2)
: Primary
Video off Option
: Suspend -> Off
IRQ4 (COM 1)
: Primary
Video off Method
: V/H SYNC+Blank
IRQ5 (LPT 2)
: Primary
MODEM Use IRQ
: 3
IRQ6 (Floppy Disk)
: Disabled
Soft-off by PWRBTN
: Delay 4 Sec
IRQ7 (LPT 1)
: Primary
** RM Timers **
IRQ8 (RTC Alarm)
: Disabled
HDD Power Down
: Disable
IRQ9 (IRQ2 Redir)
: Primary
Doze Mode
: Disable
IRQ10(Reserved)
: Primary
Suspend Mode
: Disable
IRQ11(Reserved)
: Primary
** RM Events **
IRQ12(PS/2 Mouse)
: Primary
VGA
: OFF
IRQ13(Coprocessor)
: Primary
LPT & COM
: LPT /COM
IRQ14(Hard Disk)
: Primary
HDD & FDD
: ON
IRQ15(Reserved)
: Disabled
DMA /master
: OFF
Modem Ring Resume
: Disabled
RTC Alarm Resume
: Disabled
Esc : Quit
: Select Item
F1
: Help
PU/PD/+/- : Modify
F5
: Old Values
(Shift) F2
: Color
F7
: Load Setup Defaults
é
é
é
é
é ê
ê
ê
ê
ê è
è
è
è
è ç
ç
ç
ç
ç