Installation
EP-MVP3C/2
Page 3-9
Section 3-3
Device Connectors
(continued)
J2
Speaker - Connect to the system's speaker for beeping
1. Speaker
3. GND
2. N/C
4. GND
Reset - Closed to restart system.
KeyLock - Keyboard lock switch & Power LED connector
1. Power LED(+)
4. KeyLock
2. N/C
5. GND
3. GND
1
1
1
(This is connected to the power button on the case. Using the
Soft-Off by Pwr-BTTN feature, you can choose either Instant
Off (turns system off immediatly), or 4 sec delay (you need to
hold the button down for 4 seconds before the system turns off).
When the system is in 4 sec delay mode, there is a special feature
to make the system to go into suspend mode when the button is
pressed momentarily.)
Turbo LED indicator - LED ON when higher speed is selected
IDE LED indicator - LED ON when Onboard PCI IDE Hard
disks is activate
J3
1
+
+
IR Connector
1. VCC
4. GND
2. NC
5. IRTX
3. IRRX
1
Power On/Off