page | 9
CONNECTING AUDIO OUTPUTS
Audio output jacks allow each source to be looped out to the audio inputs of an additional amplifier creating a
larger audio system. A subwoofer output is joined with each speaker output, providing optional 2.1 audio for every
audio zone.
CONNECTING SPEAKERS
These amplifiers have Phoenix-style terminal blocks for speaker connections. Speakers can also be wired to
bridge channels to increase the power available to the speakers.
CAUTION!
Check the polarity of the speaker and wire before connecting to the amplifier.
ATTENTION !
Vérifiez la polarité des enceintes et des câbles avant de brancher à l’amplificateur.
To connect stereo speakers:
1.
Power off the amplifier, then remove the output’s terminal block.
2.
Connect speaker wire to the terminal block and reinsert the terminal
block into the amplifier.
IMPORTANT!
The common signal of these speaker outputs must not be
connected together or to any other common signal.
