page | 8
www.snapav.com Support 866.838.5052
CONNECTING THE AMPLIFIER
These amplifiers are designed to operate as a multi-room audio system, requiring physical audio connections as
well as connections to a control system. This section describes how to set up the physical connections required
for the amplifier and the devices associated with it.
WARNING!
Connecting speaker wires or input cables while the amplifier is powered may cause electrical shock
and could damage the amplifier. Unplug the amplifier and the devices associated with it.
AVERTISSEMENT !
Les fils se reliants de haut-parleur ou les câbles entrés tandis que l’amplificateur est actionné,
peuvent causer le choc et pourraient endommager l’amplificateur. Débranchez le cordon de secteur avant
d’établir des rapports.
CONNECTING NETWORK AND POWER
To connect the amplifier to ETHERNET and POWER ports:
1.
Connect an Ethernet Cat5E/6 cable from a local network
connection into the RJ45 port.
2.
Connect the provided power cable to the amplifier’s power input
and to a power outlet.
3.
When the power cable is connected, turn on the power switch.
Initially, the amplifier turns on in Standby mode. Press the front-
panel power button to fully power up.
CONNECTING AUDIO INPUTS
Source input jacks accept stereo line-level audio connections. Each
source input can be routed to any speaker output.
Power
cable
Ethernet
cable
www.snapav.com Support 866.838.5052
