Getting Started
17
VGA Grid User Guide
a.
The Epiphan Network Utility
b.
The EpiphanTouch app
c.
From the network administrator
d.
Using the Factory Default static IP address. Only if the steps in section,
Connecting Directly to the , are followed
3.
Log in as the VGA Grid’s administrator user
User Name:
admin
Password:
configured password
<return>, there is no factory default password
so unless a password has been configured, just hit <return>
The Web admin Interface opens.
4.4
Users Logging
The VGA Grid comes with two pre-configured users which are used to log in the
control interface. The first is the administrator user, its user name is
admin
and the
second is the viewer user, its user name is
viewer
. Each can be assigned a password
but their user names cannot be altered. It is not possible to create new log in users.
4.4.1
The Administrator User
The administrator user is used to log into the VGA Grid and perform any of the
following functions:
1.
Perform configuration changes to the VGA Grid.
2.
Manage the current broadcast. This can include the starting or stopping of the
recording of the broadcast.
3.
Manage previously saved broadcasts. Including the archiving of recordings.
4.
System monitoring. This would involve retrieving any system statuses and
retrieving the hard disk status.
5.
Upgrading the System Firmware from Epiphan Support. New firmware is
released to fix known problems or to add new features.
As a default factory setting, the administrator user does not come with a password
but it is recommended that a password is configured as early as possible for security
reasons.
4.4.2
The Viewer User
The viewer password is used to log in to view broadcasts and does not have any
administrative ability.